慧榮SM2246AA SSD量產工具

慧榮SM2246AA SSD量產工具是一款慧榮固態硬盤SMI Mass Poduction Tool SM2246AA SSD量產工具， 慧榮sm2246EN主控芯片開卡工具M(jìn)PN0325A版本，本程序支持多顆FLASH。壓縮包內有FLASH支持列表。設置密碼為2個空格鍵，本工具適用于使用慧榮主控的固態硬盤量產開卡使用。

軟件說明

可設置磁盤類型為SSD/HDD以及可移動盤。支持更新ISP固件等等，功能還是比較豐富的，遺憾的是操作界面為英文，暫時還沒有中文版本。

更新內容

1.add Show all RDT result button on 8Port RDT tagPage
2.add Compare SN function on BarCode dialog.
3.Fix Dump Erase count issue for TLC NF.
4.Add 0xF1/0x28 vendor command on DRAM Test procedure.
5. Check SN wheather is reaptly on Barcode dialog
6.Add SLC Region Capacity on CID setting for TLC.
7.Add new case "A-Top" with in DRAM Vendor fields
 it is the same as "NANYA" setting, PM Stanley request.
8.Modify Verify Card Size rule for SM2246 TLC, RD David request
9.Fixed 8Port RDT Result Display.
10.If SN repetition, modify the Warning message box to "Continue" and "Exit" 
11. If it is 0MB after scan drive, it will show"Can't Detect Drive"
12. Add "SaveSN WWNfail".
13. 8Port RDT repaint when change Tag page or screen move.
14. Add 4th fail case when RDT fail, "0xFF Pattern"
15. Mofied Time stamp units as "Secs" on MarkBad TagPage.
16. Scan Drive first when open MP tool, in PNY mode.
17. Modified 8 Port RDT display.
18. On BarCode, add "check Whether is 8 SN inputting" and
- "Check whether is any SN exist"
19. Modify message button text as "Continues" and "Return"
20. Remove Check PNY SN format on QC procedure.
21. On Barcode, add Warning message box for "Continues" and "Return".
22. When enable Barcode, if some Port, it didn't input SN, it will show warnong
 messsage "Port # Serial Number is empty in Barcode!""
23.  ON Scan Drive, if it didn't input SN on Barcode, it will show Warning message.
24. After push "finish" in Barcode, it will scan drive again automatically. 
25. Mark Check PNY SN format.
26. Add Tag page "Assembly Verification" for PNY, in setting.set [OPTION]
 ENABLEASSEMBLYVERIFICATIONPAGE=1
27. Add "Dual DRAM" option for Pretest option setting 
28. Add display RDT Hours and Loops in "8port RDT result" tag page.
29. For PNY, it will show QList on initial MP tool.